d.p's 95 KA-T Build

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

d.p's 95 KA-T Build

Post by picsbypenny »

First lets start with a little background. I still have all my other 240s, the TT SBC S13 and The Vert, but when my friend (s14tan) said he was getting rid of his car I had to jump on it! His plans for the car was to drop the SR and build a badass KA-T. Well he got started on this, he pulled the SR and dropped in the KA. Well I guess some stuff came up and then he got his priorities straightened out a bit and decided to get out of the 240 game for a bit.

When I got the car I found a few things that needed to be fixed before I even took it home. Car needed a battery, some chewed up wiring fixed, and some grounds that needed to be re connected. I added some fuel and found out that the tank has a massive crack in it and the lower timing guide broke. This wasn't going to stop me from getting the car home though.

Well I had some parts originally for the vert, but they got donated to the S14. First off the wheels were swapped over and I lowered the car more and rolled and pulled the fenders. I then took a long hard look over the vert and realized that the KA-T setup needed to go onto the S14. So I took it apart and remembered that I had a pretty beffy ram style manifold from an old S14 with a KA-T.

I know I may not seem to care about the looks of my car, but I wanted this on e to be a little better than all the other 240's that I've owned. I added some ricer stuff o make the car a little more me lol. I added kouki skirts, roof wing, and took off the se spoiler.

Okay back to the motor. I had been lurking on here for a while and decided to start asking questions about things I needed to complete the setup before I started. I slowly bought some more stuff for the car that I felt was necessary for the setup (MAF, Injectors, JWT, etc..)

Here is now.

Mod List. 09/19/16

- 3076R/Cast Mani
- Turboholic's 264/264
- Greddy VSPL FMIC
- Greddy Type RS BOV
- TiAL F38
- Megan Racing Downpipe
- Topspeed Pro1Test Pipe
- BlitZ Nurspec
- Topspeed Pro1 Radiator
- Nismo 740's
- HKS Drag Coilovers
- Z32 BMC
- Z32 Front Calipers
- Agency Power Brake lines
- Some Random Whitebunny Setup
- Innovate MTX-L Wideband
- GM IAT
- DIYAutoTune MS2PNP
- Topspeed Pro1 Front Tension Rods
- Topspeed Pro1 Rear Tension Rods
- Topspeed Pro1 Rear Upper Control Arms
- ISR Solid Subframe Bushings
- Q45 VLSD
- Q45/TT Axles

Topspeed Pro1 was a sponsor for my S13 and decided to hook me up with some parts to test out on this car.

So far I have pulled the stock intake, stock manifold, and swapped out the battery to a smaller power cell. Installed the new turbo manifold, turbo (clocked to fit) relocated power steering reservoir. Tried to install the coldpipe only to realize that I need a S13 SR cold pipe instead of the S14 SR pipe that I have. No biggy though, I'll take it from the vert lol. After I figure out some of the oil feed/drain stuff, I'll get started on that next. Weather pending I'm going to wire in the z32 MAF and the injectors.

Here's a pic:

Image


I'll add more pictures as I continue to make progress.

Thanks for reading :)

Updated the parts list a tad... pics on page 6 :p
Last edited by picsbypenny on Mon Sep 19, 2016 11:01 am, edited 10 times in total.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

Cool car buddy. More pictures please :P
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Thanks for all your help so far man! Maybe we can meet up at a track up in Oklahoma, after I get my new clutch.

Image
pic the day after I put the wheels on...
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

that would be awesome. Im curious to see how the ram horn mani looks, if you have any pics of that post them up :D
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Image

Previous owner(of the manifold) made high 400's with this manifold/wastegate combo.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

I made decent power with the eBay mani as well.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

I don't think it's eBay, I have an eBay manifold, that thing is complete poop compared to this mani.

On another note, I tried starting the car earlier. Didn't get spark with the JWT ECU , but I got spark with my stock ecu. What do y'all think it could be?
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

Trust me it is. I ran mine for over 2 years. I had to weld it twice. I bought mine used for $40 but it was a good breathing manifold.
http://www.ebay.com/itm/Jdm-240SX-S13-S ... 39&vxp=mtr
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
rtm240sx
Knows Some Stuff About 240's!
Posts: 323
Joined: Wed Mar 28, 2007 9:46 am
Location: south florida

Post by rtm240sx »

Looks like a ebay manifold that was just rewelded. Just like the one I have.
ONLY REAL MEN STAY KA
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Oh well I have a reinforced eBay mani then. Anyone have any input about the ecu issue?
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

I reread your post and don't see where you asked about the ecu. As for the mani, it is a decent mani. It spooled my 60-1 and 60 trim good.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

picsbypenny wrote: On another note, I tried starting the car earlier. Didn't get spark with the JWT ECU , but I got spark with my stock ecu. What do y'all think it could be?
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

Thanks, I was looking in the first post. As for spark, make sure the eeproms are sitting correctly. Also, I believe if the OBD light is on all the time, there is an issue with the ecu. Email JWT for assistance as well.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

supakat wrote:Thanks, I was looking in the first post. As for spark, make sure the eeproms are sitting correctly. Also, I believe if the OBD light is on all the time, there is an issue with the ecu. Email JWT for assistance as well.
EEPROM as in the daughter board?
Obd light is not on.
And do you know if there is a better email for JWT other than contact@jimwolftechnology.com?
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Image

Got in contact with Ben at JWT and we started trouble shooting my ECU.... Either way I'm sending it back for a re-tune. For now we are trying to get the car started.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
FlatBlack
Knows Some Stuff About 240's!
Posts: 305
Joined: Thu Dec 10, 2009 10:09 am
Location: U of A Fayetteville

Post by FlatBlack »

Car is looking good - hope you get the ECU sorted.
89 240SX Coupe
02 GMC Sierra Z71 5.3L 4x4
03 Kawasaki 636 ZX-6R
77 Honda Trail 70 140cc swap
Charlie240sxt
Dreams of owning a 240!
Posts: 61
Joined: Thu Apr 22, 2004 10:34 pm
Location: Tulsa,Oklahoma
Contact:

Post by Charlie240sxt »

Nice car man
04 Audi A4 1.8T ,95 240sx SE,12 Ram 2500 HD
........Daily................Toy................Tow/Haul.......
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Thanks guys!

So I got most of the hot piping tied up last night, I forgot all the random hassle there is going top mount. I had to borrow my buddy's A/C Refrigerant extractor so I could move the A/C lines. For now I can live without A/C, but I'll figure a way to run it in the future. As for the ECU we trouble shot it and figured out that its possibly fried. My stock ecu turned over the car and the light on the ecu came on when the car was ready to crank. Upon further inspection the JWT ECU didn't have a LED in it, and my dash doesn't have a check engine light, so I couldn't check that way. We checked for spark and injector pulse, but it had neither. So I will be sending off the ECU today or tomorrow and will be finishing up the cold side and oil lines tonight.

poor car :/ I feel like all the broke dick teenage 240 owners around here now with no bumper :/


Image
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

So I put my ECU up for sale on a local 240 board and explained whats wrong with it... hopefully I get at least half of the money back on it, then I'm going microsquirt DIY PNP.
Until then Ill keep playing around with some things. Depending if my buddy is still at his shop when I get off work I'll get him to weld my Greddy RS flange on to my cold side pipe and Install the Greddy RS BOV, Tial WG, and TurboXs Manual Boost Controller. Yesterday I was bored and found about 50ft of heat wrap so I decided to wrap the turbo elbow elbow and tonight I'll probably wrap the manifold as well and install my Z32 BMC so I can finish up the heat shield. Got plenty of work a head of me and should keep me busy until I have the money for the DIYPNP.

ALSO: If anyone can help me, I have no clue where to run the vacuum lines for the BOV, WG, and Boost Controller.

Image
Last edited by picsbypenny on Sat Oct 20, 2012 9:16 am, edited 1 time in total.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

Tee off your brake booster hose and use that line for vac sources.
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Is that the block thingy I see everyone using?

Image
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

Yes! but there are cheaper alternative on ebay for like 15$
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

http://www.ebay.com/itm/Vacuum-Distribu ... 16&vxp=mtr

this looks okay...

I feel like I can make one.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
emo_tactical9
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3086
Joined: Tue Sep 18, 2007 3:21 am
Location: Bowling Green, KY

Post by emo_tactical9 »

Did you see the deal on the DIYPNP Supercoupe is selling?
Just call me Adam.
95 240: DIYPNP and T28.
08 Honda Fit
84 200sx: Sold after almost 10 years.
My file hosting:Calum,MegaSquirt,FSM
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

yah I PM'd him, since I don't have enough posts to comment on his thread..

$445 shipped is cheapppppppp.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
FlatBlack
Knows Some Stuff About 240's!
Posts: 305
Joined: Thu Dec 10, 2009 10:09 am
Location: U of A Fayetteville

Post by FlatBlack »

Get it if you can!

I had a full MS2 Extra ECU that came off my turbo Z car, otherwise I would have got a PnP.
89 240SX Coupe
02 GMC Sierra Z71 5.3L 4x4
03 Kawasaki 636 ZX-6R
77 Honda Trail 70 140cc swap
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Is this how to hook up wastegate and boost controller?

Image

Don't laugh at the pic, it was like 2am in the morning.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

Hook compressor straight to bottom WG port. WG does not need vacuum to work. The top is not needed until you put a boost controller on. As for the BOV, it needs to be connected to a vacuum source. Nice drawing btw.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
rtm240sx
Knows Some Stuff About 240's!
Posts: 323
Joined: Wed Mar 28, 2007 9:46 am
Location: south florida

Post by rtm240sx »

How does your downpipe line up with that manifold?
ONLY REAL MEN STAY KA
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

Thanks supakat!

Rtm- I have a EMUSA 5bolt turbo elbow that we massaged to line up with my Megan Racing Downpipe.
Wasnt too far off but didn't wiggle through till I adjusted it with my hammer lol.
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
Post Reply